SSC MODEL

Features

RO Elements: 4″ x 40″ Extra Low Energy Thin Film
Pressure Vessels: 304 Stainless Steel (SS)
Pump: Centrifugal 304 SS Shell, 316 SS Shaft
Frame: 409 SS
Control: Programmable with LCD Readout
Flow Meters: Product and Waste
RO Pressure Gauges
Low Pressure Cutoff Switch
Pre Filter: 5 Micron Sediment
Inlet Filter Gauges (pre and post filter)
Inlet Feed Electric Solenoid Valve
Inlet Manual Shutoff Valve
Product Reverse Flow Check Valve
Waste Recycle Valve

Options

Total Dissolved Solids (TDS) Meter
Product Dump Valves (option requires TDS meter)
Remote System Status Indicator Lights
Carbon Tank for Chlorine Removal
Water Softener
UV Light

Dimensions

HEIGHT	DEPTH	WIDTH
72 inches	18 inches	48 inches

Specifications

MEMBRANES	PRODUCTION*	RECOVERY	MOTOR**	WEIGHT (APPROX.)	INLET***	OUTLETS
Qty. 3	4,500 GPD	50%	2 HP	350 Lbs.	1″ FNPT	3/4″ FNPT
Qty. 4	6,000 GPD	50%	2 HP	380 Lbs.	1″ FNPT	3/4″ FNPT
Qty. 5	7,200 GPD	50%	2 HP	410 Lbs.	1″ FNPT	3/4″ FNPT
Qty. 6	9,000 GPD	50%	2 HP	440 Lbs.	1″ FNPT	3/4″ FNPT
Qty. 8	12,000 GPD	50%	2 HP	500 Lbs.	1″ FNPT	3/4″ FNPT
Qty. 10****	14,400 GPD	50%	2 HP	560 Lbs.	1″ FNPT	3/4″ FNPT

* Approximate product flow based on properly pretreated feed water of 1000 ppm TDS (as NACL), 15°C (59°F) and silt density index less than 3. Production capacity may vary due to feed water temperature, pressure, quality and product back pressure.

** Electrical: Standard: 230 VAC 60 HZ single phase (20 AMP L6-20 plug), Or 220/230 VAC 50 HZ Single Phase Pump: 125 PSI Maximum.
Important: do not operate at low or reduced voltage, (ie 208 VAC). Overheating and reduced pump life will occur.

*** Inlet pressure 20 PSI Minimum (when running), 80 PSI Maximum.

**** Qty. 10 available on 60 HZ units only (50 HZ not available).