CWM MODEL

Features

RO Element: 4″ x 40″ Extra Low Energy Thin Film
Pressure Vessels: 304 Stainless Steel (SS)
Pump: Centrifugal 304 SS Shell 316 SS Shaft
Frame: 409 SS
Flow Meters: Product And Waste
Low Pressure Cutoff Switch
Pre Filter: 1 Micron Sediment
Pump Inlet Pressure Gauge
Inlet Feed Electric Solenoid Valve
Inlet Manual Shutoff Valve
Product Reverse Flow Check Valve
Waste Recycle Valve
Electronic Controller

Options

Carbon Tank for Chlorine Removal
Water Softener
UV Light
Remote Storage Tank
Product Dump Valves
Remote Light Kit
Product Total Dissolved Solids (TDS) Meter

Dimensions

HEIGHT	DEPTH	WIDTH
72 inches	20 inches	30 inches

Specifications

MODEL	ELEMENTS	PRODUCTION*	RECOVERY	MOTOR**	SHIPPING WEIGHT (APPROX.)	INLET***	OUTLETS PRODUCT	OUTLETS CONCENTRATE
CWM-1	Qty. 1	1,500 GPD	50%	3/4 HP	200 Lbs.	3/4″ FNPT	1/2″ FNPT	1/2″ FNPT
CWM-2	Qty. 2	3,000 GPD	50%	3/4 HP	230 Lbs.	3/4″ FNPT	1/2″ FNPT	1/2″ FNPT

* Approximate product flow based on properly pretreated feed water of 1000 ppm TDS (as NACL), 15°C (59°F) and silt density index less than 3. Production capacity may vary due to feed water temperature, pressure, quality and product back pressure.

** Electrical: Standard: 240 VAC 60 HZ Single Phase Pump: (15 Amp Type 6-15P Plug), 125 PSI Maximum (4″ Element).
Optional: 240 VAC 50 Hz (Plug varies depending on location).

*** Inlet Pressure: 20 PSI Minimum (when running), 80 PSI Maximum.